for traditional thermal platesRaptor+
The necessary original spare parts and step-by-step instructions to complete the recommended annual maintenance on you plate processor, to keep it in top running condition.
Keep your pre-press room tidy and organized by hiding the containers with easily fitted side panels. Are easily removed without tools to give full access to the space under the processor.
Keep your pre-press room tidy and organized with a drip tray which lay on the floor below the processor to collect and hold fluids which are accidentally spilled onto the floor.
The delivery table manages the processed plates while the operator feed plates to the processor. It is mounted at the processor exit and collect plates as they have been processed. For automatic online configurations it is recommended to use a stacker instead, which can handle a higher capacity.
Easy feeding of plates into the processor when it is used in an offline or manual configuration by adding a table surface/top for resting plates onto when they are fed into the processor. For inline configurations you can use a conveyor to connect with the CtP, instead of a feed table.
Reduce your water consumption with more than 85% by adding the water saving option which circulate/re-use a most of the water.
Monitor, correct settings and diagnose the condition of the processor via the local network or modem, for example check chemistry, replenish and waste/water levels, temperatures, or if there is a plate jam.
This software release is valid for any of the Raptor+ processor platform variants which have the GNUC II electronics (one line digital display):
Configuration files